Fig. 5.
Fix the wire loop to the bolt A (Fig. 5).
Thread the wire through the pipe B located behind the rollers on the conveyor (Fig. 5).
Thread the wire via the roller C (Fig. 5) to the winch D (Fig. 5).
3. Using the debris drum
3.1. Hydraulic drive
Connect the hydraulic hoses so that the oil flows in the correct direction.
The hydraulic hose on the pressure side is screened with a protective sleeve.
3.2. Powered by electricity
Make sure that the direction of rotation of the discharge conveyor is correct.
As required, change the direction of rotation using the switch in the plug.
3.3. Adjusting the wood throughput speed
The wood throughput speed can be adjusted by changing the angle of the debris drum by either
extending or shortening the legs.
In a hydraulically driven machine, the rotational speed of the drum and the conveyor can be
altered by adjusting the speed regulating valve next to the hydraulic motor. The unit comes with
separate adjustment valves for both the drum and the conveyor.
4. Service measures