49
004772533 - 16/03/2021
ENGLISH
7.2 USING THE CONTROL PANEL
- The arrow buttons
are used to scroll between the different menus that are highlighted.
- When selecting a given function, any submenus available can be scrolled using the
buttons; to set a
parameter simply use the
button and modify the values, again using the
buttons. Pressing the
button confirms the setting.
- In general all values that are flashing can be modified using the
buttons.
- The “annulla” button
goes back up one level in the menu; pressing and holding the button displays any
active alarm or error codes.
7.3 OPERATING PARAMETERS
Stove operation is determined by the Power level and Temperature parameters set by the user.
7.3.1 setting the power level
The power level defines the amount of heat produced by the stove and consequently directly affects fuel
consumption.
To change the power level use the
buttons to go to the power menu
a) Use the
buttons to scroll the submenu
b) Select submenu “
1
” and confirm by pressing
.
c) The power level value will flash; set the value using the
(buttons (
1
minimum,....
5
maximum)
d) Press
to confirm the settings.
7.3.2 Setting the temperature
Different temperature values can be set depending on the boiler’s configuration:
a) Use the
buttons to go to the temperature menu
and press
;
b)
The current value will flash; change it using the
buttons
c) Press
to confirm the settings.
Water temperature (configurations 1 only)
: setting this value changes the desired hot water outlet temperature.
Room temperature (configuration 2 and 5 only):
setting this value defines the desired room temperature,
read directly by a probe fitted on the boiler.
Storage temperature (configurations 3 and 4 only)
: identifies the minimum desired temperature inside the
storage tank.
7.3.3
Changing the ventilation (only if connected, in configuration 5, to the Everspring system)
To change the value of ventilation of the Everspring system:
a) Use the
buttons to go to the fan menu
and press
;
b) The fan speed value will blink; modify the value by pressing
;
• “1” minimun,..., “5” maximum;
• “Auto” = automatic functioning (the stove will set automatically the fan speed and the stove power
according to the room temperature);
• “Hi” = ultrarapid functioning (to use only in the case you need to quickly heat the room);
c) press the button
to confirm the data you set.
Summary of Contents for EcoFire IDRO
