ITALIANO
ENGLISH
FRANÇAIS
004778982 - 09/08/2022
95
10.2 Ordinary cleaning
10.2.1 Cleaning the inside of the firebox
Daily or before each ignition, it is necessary to
check that the burn pot is clean to ensure the free
flow of combustion air from the holes of the burn
pot itself.
Vacuum the ash accumulated in the burn pot
(
Fig. 56
).
Remove the ash from the combustion
chamber as the salts present cause cor-
rosion of the metal. In addition, the ash
could block the passage of air, varying
the development of the flame which, if
it approaches the glass, would increase
corrosion.
If necessary, remove the ash drawer and empty it,
making sure to remove any residue in the com-
partment where it is contained (
Fig. 56
).
Using an ash vacuum can simplify the
cleaning operations
Fig. 56
10.2.2 Cleaning the glass
This is done with a damp cloth or damp paper
towel passed through the ash (
Fig. 57
).
Rub until the glass is clean.
Do not clean the glass while the stove is on and do
not use abrasive sponges.
Do not use solvents, acids or deter-
gents, liquid detergents or aggressive
products.
Fig. 57
Summary of Contents for ECOFIRE VIVIENNE
Page 147: ......
