ENGLISH
6.6.4 Operation with room probe
In certain circumstances the stove may need to
modulate operation based on the temperature read
by the room probe
¿
tted on the stove.
For this purpose it is necessary to bring the probe
environment present on the stove (
¿
g. 6.10 - B) in a
location outside coating that read the correct room
temperature.
The stove must be set to con
¿
guration 2 following
the instructions shown in the paragraph on “Initial
con
¿
guration”.
6.6.5 Connection to a storage tank with coil
The stove can be used to maintain the temperature
inside a storage tank
¿
tted with coil.
In this case simply disconnect the external
temperature probe from the stove and
¿
t it in the
probe socket on the storage tank.
The stove must be set to con
¿
guration 3 following
the instructions shown in the paragraph on “Initial
con
¿
guration”.
6.6.6 Connection to a storage tank without coil
The stove can be used to maintain the temperature
inside a storage tank without coil.
In this case simply disconnect the external
temperature probe from the stove and
¿
t it in the
probe socket on the storage tank.
The stove must be set to con
¿
guration 4 following
the instructions shown in the paragraph on “Initial
con
¿
guration”.
To ensure that the cables do not affect the operation
of the stove, run them through the
À
exible rod on
the back of the stove itself.
39
