4 Preparation of the place of
installation
4.1 General considerations
The following paragraphs contain some guidelines to be
followed to obtain the maximum efficiency of the product
purchased and to ensure safe operation. The following
instructions are nevertheless subject to compliance with
any laws and national, regional and municipal regulations
in force in the country where the product is installed.
4.2 Safety Precautions
Responsibility for the works carried out in the space of
the appliance location is, and remains, the responsibility
of the user; the latter is also responsible for carrying out
checks regarding the proposed installation solutions.
The user must comply with all local, national and
European safety regulations.
The appliance must be installed on floors with adequate
load bearing capacity.
If the floor is not of sufficient load-bearing capacity, it is
advisable to use a load distribution plate of adequate
dimensions.
The operations for assembly and disassembly of the
appliance are reserved for specialist technicians only.
It is recommended to make sure about their qualifications
and their actual capacity.
The person in charge of the installation, before starting
assembling or disassembling the machine, must comply
with the safety precautions required by law and in
particular to:
- must not operate in adverse working conditions;
- must operate in perfect psychophysical conditions and
must check that the personal protective equipment is
intact and functioning perfectly;
- must wear safety gloves and shoes;
- must make sure that the area involved in the assembly/
dismantling phases is free from obstacles.
4.3 Place of installation
For the minimum distances expressed in cm that must be
respected in the positioning of the product with respect
to flammable materials and objects, refer to the product
manual delivered that accompanies the appliance.
Protect all structures that could ignite if exposed to
excessive heat.
Floors made of flammable material such as wood,
parquet, linoleum, laminate or covered with carpets
must be protected by a fireproof base under the stove
that also protects the front part from the possible falling
of combustion residues during cleaning.
The manufacturer declines all responsibility for any
variations in the characteristics of the material constituting
the floor under the protection.
Any wood items (e.g. beams) or in combustible material
located in the vicinity of the fireplace should be protected
with a non-combustible material.
Provide a technical space accessible for maintenance.
Please remember to respect the minimum distance from
flammable materials stated on the id plate of the tubes
used to manufacture the fireplace.
The appliance is provided with wheels for positioning,
paying particular attention to adequately protect the wood
or parquet floors in order to prevent the weight of the
appliance to damage them during movement.
28
cod. 004777520 - 21/03/2019 - Palazzetti - PN - Italy
Summary of Contents for ECOMONOBLOCCO WT F Series
Page 103: ......
