41
M
O
N
L
Fig. 8.2.4a
Fig. 8.2.4b
Fig. 8.2.4c
Fig. 8.2.5a
Fig. 8.2.5b
ENGLISH
•
Insert the Twister Flue L into the fire box and pass it through the flue outlet hole until the flange M is in abutment with the
upper face of the fire box aligning the grooves N with the brackets O (Fig. 8.2.4a - Fig. 8.2.4b).
•
Turn the Twister Flue clockwise or anti-clockwise and release it so that the brackets O act as a support to it (Fig. 8.2.4c).
•
Position the chimney section supplied with the Twister Flue as shown in the figure and siliconate the joint area
(Fig. 8.2.5a - Fig. 8.2.5b).
