35
ENGLISH
8
INFORMATION FOR DEMOLITION AND
DISPOSAL
Demolition and disposal of the wood insert
is the sole responsibility of the owner.
Dismantling and disposal may be entrusted
to a third party provided we are talking
about a company authorised to salvage
and eliminate said materials.
In all cases you must abide by the laws
in force in the country of installation as
regards the disposal of materials and, if
necessary, the report of disposal.
All dismantling operations for demolition
must take place when the
wood insert
is
still.
Contact the local authorised waste disposal
company to scrap the wood insert structure
Dumping the product in accessible areas
is a serious hazard for both people and
animals.
The owner is always responsible for injury
to people and animals.
When the wood insert is demolished,
the EC mark, this manual and all the
other documents relative to it must be
destroyed.
The picture of the bin crossed is labelled
on the equipment, and it means that when
the device is out of use it has to be kept
separated by other wastes.
In this case both the fan kit:
On the basis of Article 13 by Legislative
Decree n°151 of 25th July 2005 actuation
of the European Directive 2002/96/CE of
23rd February 2003 on waste electrical
and electronic equipment. It is connected
to the policy and action which aim to
the prevention of waste electrical and
electronic equipment,named RAEE, and
in addition, the reuse, recycling and other
forms of recovery of such wastes so as to
reduce the disposal of waste. It also seeks
to improve the environmental performance
of all operators involved in the life cycle of
electrical and electronic equipment.
Summary of Contents for ECOPALEX T Glass
Page 19: ...19 ITALIANO ...
