52/172
cod. 00 477 2250 - 11/2013 - PN - Italy
USE AND MAINTENANCE
7 STOVE SETUP AND
USE
7.1 LOADING THE PELLETS
Before the stove can be lit the fuel storage container
!
!"
7.1-1). Do not empty the bag directly into the
container.
7.2 DESCRIPTION OF THE CONTROL
PANEL
The panel is composed of an LCD,
ON
and
OFF
buttons and two MENU (
/
) buttons
(Fig.
7.2-1)
.
By way of the panel you can turn the stove on and
maintenance programmes.
The display shows three stove status phases:
1)
OFF
- indicating that the stove is not
working or is cooling down.
2)
START
- indicating that the stove is in the
starting phase.
3)
WORK
- indicating that the stove is on and
warming up.
Stove programming is possible with two different
interfaces:
1)
Rolling
_
one at a time in rotation, on the
second line of the panel.
2)
Short
_
together on the second line of the panel.
The stove is delivered with the
Rolling
mode.
)
The user can decide to go from the Rolling mode
to the Short mode, or vice versa, in any phase
(paragraph 7.6.3.3).
7.3 COMBUSTION START PHASE
7.3.1 Electric power supply
Connect the stove to the electricity mains and press
the switch down, “
I
”, (on) (par. 6.6.4).
If connection is correct, the stove emits an acoustic
signal, the display turns on and the wording
“ROYAL” appears (Fig. 7.2-1). Two seconds later
“
OFF
” appears, as indicated in Fig. 7.3.1-1 and on
the second line the following parameters appear
in rotation:
POWER;
WATER T. SET;
WATER TEMP.;
SET ROOM T.
Fig. 7.1-1
Fig. 7.2-1
Fig. 7.3.1-1