56/172
cod. 00 477 2250 - 11/2013 - PN - Italy
USE AND MAINTENANCE
7.6 ADVANCED USE OF THE CONTROL
PANEL
The functions for the advanced management of the
stove will be illustrated and explained in this chapter
like, for instance, programming automatic turning
on and turning off, use of a different user interface
(Short menu type) and more still.
Figure 7.6 shows the display highlighting the
elements that can be viewed.
Function
:
the description of the function that can
be activated is in the center in upper
case.
Command
:
there could be a symbol (
,
) or
a word written in italic (
ok, x
) on the
corners (by one of the four keys);
these commands are executed by
pressing the key immediately next
to it.
Legend of the commands:
ok
_ !
x
- to exit the display and return to the previous
one.
- scrolls the various displays or increases the
parameter value.
- scrolls the various displays or reduces the
parameter value.
To
ACCESS
the MENUS.
1) Press
keys
simultaneously the
MENU
SET WORK
appears on the display.
2) Press
to scroll the other menus:
MENU
TIMER, MENU SET STOVE
.
To
ENTER
the menù wanted: view the menu
wanted on the display and press
ON
(
ok
).
To
EXIT
the menu and return to the previous one:
press
OFF
(
x
).
Example.
To access the
MENU SET WORK
shown in (Fig.
7.6.1-1) press “
ON
< +
k
” command.
To scroll the ot
er menus pre
s the key
corresponding to t
e command or the key
corresponding to the command.
7.6.1 Menu SET WORK
o p e r a t i o n , v i e w i n g a l l w o r k p a r a m e t e r s
simultaneously.
What to do:
1) Display the “
MENU SET WORK
” (Fig. 7.6.1-1)
2) press ON (ok) to access it; the initials of the
work parameters appear on the second line of
the display (Fig. 7.6.1-2):
P
=
POWER; (see paragraph 7.4);
T
=
SET WATER T. (see paragraph 7.4);
t
=
SET ROOM T. (see paragraph 7.4).
C
= Command
F
= Function
P
= First Line
S
= Second Line
Fig. 7.6
S
P
C
C
F
C
C
Fig. 7.6.1-1