INSTALLATION
8 COMMISSIONING
AND USING THE
TERMOPALEX
8.1
DESCRIPTION OF THE PRODUCT
¡¢
model” described for the Termopalex model in question
in the enclosed “Product booklet”.
8.2
PRELIMINARY CHECKS PRIOR TO LIGHTING
¢ ¡
{ ¡
the pressure.
The above check must always be made:
>
> At the beginning of each winter season;
> j
This will ensure that the TERMOPALEX is not lit if there
become deformed or even break.
Note: If the pointer on the water gauge is on 0 (zero),
¡X
> leaks in the system
> the water has not been topped up.
If you have any doubts, call your usual plumber.
8.3
DIGITAL CONTROL UNIT / CONTROL PANEL
switch is on the ON position.
The central unit must never be switched off when the
{
the embers have died.
In the event of a power outage, do not turn on
$ #
8.4
LIGHTING THE STOVE FOR THE FIRST TIME
LIGHT THE FIRE ONLY IN THE FIREWOOD HOLDER
.
¤ W
should be kept low.
> EIf there are any unpleasant smells or fumes they
are caused by the evaporation or drying of some of the
materials used. This phenomenon will last for several
days but will gradually disappear. To speed up the
evaporation process, it is recommended to leave the
! ='$ ¢
output, leaving the windows in the room open to get rid
of any bad odours.
> Place rolled up balls of paper in the hearth, cover the
¡ ¢
> Open the comburent air grid completely (Fig. 8.1:
-CLOSED; +OPEN).
approximately half the recommended quantity. As soon
W
Never use alcohol, petrol, kerosene or other liquid fuels
¢
`
as they can seriously damage the hearth’s walls.
~¢
¤ ¡ W
materials must be placed at a distance of at least 130
cm from the radiation surface (glass sides of the hearth).
36/96
cod. 004772420 TMPX VC - 10/2013 - Palazzetti - PN - Italy
