Revision 1.0
5
4. Do not overload. See the Rating Label on the unit for the rated load. Remember that this limit applies
to both raising and lowering operations.
5. Each load should be placed in a stable position as near as possible to the body of the truck/trailer.
6. Never stand in, move through or allow anyone else to stand in or move through the area in which the
lift operates, including that area in which a load might fall.
7. This is not a passenger lift. Do not ride the lift with unstable loads or in such a manner that a failure
would endanger you. The lift is not equipped with a back-up system to prevent falling cargo in the
event of a failure.
The maximum loads must be observed and followed!
IMPROPER USE
It is not permitted to use the tail lift:
•
As an elevating work platform
•
To push loads
•
To carry people (Only the operator may travel on the platform)
•
To clear snow
Please read through the operational and technical description of this PALFINGER Liftgate.
Thank you for choosing PALFINGER Liftgates.