ILSL 33/44 Owner‘s Manual
Rev.1.1
19
6.2
Lubrication
Properly lubricated, the ILSL series PALFINGER Liftgates will ensure longevity. Lubricate the liftgate at the
same time as the trailer. Grease more frequently if the liftgate is heavily used. The liftgate should be
greased every 500 cycles (depending on use – estimated every 3 month).
All bearing points must be lubricated in accordance with the maintenance intervals.
Reminder: Lubricate all points with the platform at ground level.
Oil reservoir
(Inside)
4 zerks:
- 1 Cylinder
- 1 Lift arm
- 1 Parallel arm
- 1 Swing fixture
3 zerks:
- 1 Cylinder
- 1 Lift arm
- 1 Parallel arm
4 zerks:
- 1 cylinder
- 1 Lift arm
- 1 Parallel arm
- 1 Swing fixture
3 zerks:
- 1 cylinder
- 1 Lift arm
- 1 Parallel arm
IN
OUT
IN
Grease – 12 places, (3 in the mount frame, 3 in the cylinder/platform area).
IN
OUT
Oil level in the power pack tank (see marking inside of power pack reservoir).
IN
Lubricate - Platform hinges and Cart Stops if present (use ZEP-45 spray for lubrication).
NOTE: Avoid using grease on rails to help prevent any mud and dirt build up.