2
Important Notes:
Revision 1.5
- 6 -
Important Notes:
2
1. Read Manual completely before beginning any work
2. Refer to your truck manufacture’s instructions before adding any auxiliary equipment.
3. Pay Special attention to items marked with this symbol:
4. All welding should be performed by qualified personnel per AWS standards
5. Always Ground closest to your welding point to prevent arcing through moving parts
6. Contact PALFINGER Liftgates for Special Installations not covered in this Installation Manual
7. Do not paint cylinder shafts or nylon rollers (Use non-chlorinated brake cleaner to remove
over spray)
8. Verify that pin lock bolts are tight
9. Grease all pivot points
10. Verify that ALL decals are placed properly (Contact PALFINGER Liftgates to replace any missing
decals)
11. Final Check-Off-Sheet at rear of this manual MUST be filled out and kept in your records for
future reference.
12. Refer to owner’s manual for troubleshooting & repairs.
Important Dimensions:
(Refer to line drawing on following pages)
1)
BED HEIGHT Bed Height Ranges: Max=Unloaded / Min=Loaded Truck
- Measure from top of body floor to ground. Vehicle must be on flat level ground
2) MOUNT FRAME CLEARANCE
- Measure from
BACK
of truck/trailer to
spring/tire or air suspension components that can interfere
with the liftgate installation
3)
REAR SILL HEIGHT and DESIGN
- Measure top of floor to bottom of buck plate and verify design regarding to Figure 1
