11
Important safety information
2.3.3
During assembly
• When connecting the hydraulic parts, ensure that the
connections are clean and that no contamination can get into the
hydraulic circuit.
• Make sure that the
PALFINGER Tail Lifts
tail lift and its moving
parts, the coupling, the brake system, the oil lines, the pneumatic
lines and the cabling of the vehicle are not damaged.
• Do not apply any overpressure to the functions lift/lower, open/
close, retract or extend before the assembly is entirely
completed.
2.3.4
During initial commissioning
• Only operate the tail lift with its body. If you operate the tail lift
without its body, there is a risk that the lifting cylinders will fall out
if the lifting height is too high, resulting in personal injury and
material damage.
• During initial commissioning of the
PALFINGER Tail Lifts
tail lift,
check whether all safety and warning features are available and
functional.
• Warning strips
• Warning lights
• Roll bar
• Lubricate all bearings and pins before initial commissioning.
Summary of Contents for MBB C 1000 L
Page 1: ...PALFINGER TAIL LIFTS ASSEMBLY INSTRUCTIONS TAIL LIFTS STANDARD ...
Page 2: ......
Page 65: ......
