20
Function of the tail lift system
Operation via a handheld cable switch with two-handed operation
Opening the platform
Press and hold the push-buttons
(a + b)
on the handheld cable
switch. Hold both push-buttons in this position until the platform is
positioned horizontally.
Raising the platform
Press and hold the push button
(a)
on the handheld cable switch
until the platform reaches the desired height.
Lowering the platform
Press and hold the push button
(c)
on the handheld cable switch
until the platform reaches the desired height.
Closing the platform
Press and hold the push-buttons
(c + b)
on the handheld cable
switch. Hold both push-buttons in this position until the platform is
completely closed.
Emergency Stop:
The tail lift system does not have an Emergency
Stop, because two-handed operation is required. The platform does not
move without actuation of the controls.