Revision 1.1
10
5.
Operation of Liftgate
Before use:
Turn Control power to “ON”, the L.E.D.’s will light up inside the cab. All liftgate functions can
be controlled with the 3-button outside control, which is mounted on the curb side of the
vehicle.
5.1
Operation by 3 Button Side Control
Always observe the platform’s operating range when opening.
Standing in the platform’s swivelling range is not permitted and includes a high risk of injury.
Figure 4: 3 Button Side Control
1. TILT DOWN TO LEVEL
Push button 1 until the platform is leveled down into an horizontal position.
2. LOWERING AND TILT DOWN AT GROUND
To lower down the gate, push button 2.
After the platform reaches ground, the tip will tilt down
if the operator continues to push the button.
3. LEVEL OUT AND LIFT FROM GROUND
Operate push-buttons 2 and 3 at the same time to level out the platform.
It will start lifting after it is tilted up in definitioned position.
4. TILT UP AT BED LEVEL.
Push button 1 and 3 to tilt the platform at bed level.
Do not forget to raise the platform fully before closing.
OPEN
LOWER
TILT DOWN
TILT UP
RAISE
CLOSE
Operating Decal
Summary of Contents for MiniFix
Page 14: ...Revision 1 1 11 ...
