PTV 35/44/55/66 Installation Manual
Rev. 1.1
30
5. Centering the Liftgate to Vehicle: After positioning the gate against the vehicle, measure the distance
from the edges of the columns to the edges of the vehicle using a measuring tape. Measure at the top
of the columns and the at bottom, both measurements must be the same,
Fig. 8
. If both
sides don’t
measure equally, shift the liftgate as required.
Measuring
Tape
Vehicle
Corner
Post
Liftgate
Column
Distance must be
equal at top and
bottom of column.
Curb Side &
Street Side
Fig. 8