16
PALLMANN GmbH l Ein Unternehmen der Uzin Utz AG | Im Kreuz 6 | 97076 Würzburg | T49 931 27964-0 | T49 931 27964-50 I www.pallmann.net
1.0 Product description
Important components of the machine
The numbering of the product features refers to the
illustration of the machine on the graphics page 2-3.
1 Motor
2 Additional weight
3 Dust seal ring
4 Transport wheel
5 Cable take-up stand
6 Electronic
7 Connection, vacuum cleaner
8 Cable extension
9 Gear lever
10 Grip
11 Handle adjustment, on
12 Button, on
13 Speed control
14 Handle
15 Plug, extensioncable
16 Gas prop
17 Locking stud
18 Operating light
19 Rubber bearing
20 Display current consumption
Functional description
Please refer to the graphics on pages 2 and 3 while
you read the operating instructions.
Restriction of use
The Spider grinding machine intended exclusively for grin-
ding of wood floorings and polishing in dry environments.
When the machine is used in another way, it shall be
regarded as unfit for the purpose. PALLMANN GmbH
shall not accept any liability for damage resulting from
nonintended use.
Declaration of Conformity
We declare under our sole responsibility that this product
is in conformity with the following standards of standard-
ization documents: DIN EN 1037, EN ISO 12100,
DIN EN 60204-1, DIN EN 60745-1, DIN EN 55014-1,
DIN EN 55014-2 according to the provisions of the:
2006/42/EC, 2004/108/EC, 2006/95/EC.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the gathering
of the technical documentation.
01.04.2017 i.V.
WOLFF GmbH & Co.KG | 74360 Ilsfeld | Ungerhalde 1
Technical data: Grinding machine
Power supply............. ......................................... 230 V AC
Frequenzy ............................................................... .50 Hz
Power consumption .................................................2,0 kW
Rotation speed ............................................50 - 400 U/min
Width of grinding Ø................................................ 400 mm
Total weight ................................................................40 kg
Additional weight ........................................................15 kg
Technical data: Triple-disc-plate
Weight ....................................................................11,5 kg
Ø Hook-and-loop disc (3 pcs).................................178 mm
Rotation speed/ Hook-and-loop disc ...........60 - 500 U/min
Includes:
1 Monodisc grinding machine Spider
1 Triple-disc-plate
1 Tool kit
1 Dust seal ring
1 Extension cable
1 Additional weight
3 Support pad
3 Support pad, soft
3 Exhaust pad
3 Shim washer
3 Ceramic Velcro disk plus178mm K 36
3 Hook-and-loop disk K 60
3 Hook-and-loop disk Sica K 80
1 Pad disk Ø400 mm
1 Manual
1 Spare parts list
A
