Page 14 Gecko Star 2.0 01/2017
7.
Operation
Caution!
Check the working area for loose boards. Any loose boards must be fastened down before sanding.
Caution! Risk of fire!
If the flooring has nails in it then these must be driven in deep enough before sanding
starts to ensure that there is no risk of them being ground during the sanding work.
Grinding nails can produce sparks that can cause a fire in the dust bag
7.1 Switching on and off
Caution! Risk of injury!
Hold the machine in both hands when switching on.
The machine is equipped with a soft-start that increases the speed gradually.
Thus there is enough time available to find the correct grip position.
Steps:
1. Tip the GECKO STAR 2.0 rearwards so that the sanding attachment is lifted off the floor.
2. Turn the machine on with the switch located at the top of the machine.
1
Summary of Contents for GECKO STAR 2.0
Page 19: ...Page 19 Gecko Star 2 0 01 2017...
