Pallmann GECKO STAR 2.0 Operating Instructions Manual Download | Manualshive

Page: 9 / 19

background image

Page 9 Gecko Star 2.0 01/2017

6.2 Installation of the dust tube

2

                                                                                     2


                                                                                     4

Note!

The GECKO STAR 2.0 is delivered with the dust tube dismantled.

Caution!
Unintentional activation of the machine may present a danger. The machine must be switched off and the main
cord unplugged for all work on the machine.

Note!

The dust tube has several drilled holes (2) at the end of the tube. The locking pin (1) latches into
these holes and prevent the dust tube turning and loosening.
The dust tube can be fastened in four positions with the locking stud (F)

Caution!
Make sure the dust tube and the connection ports are dust free

1

3

«
...
7
8
9
10
11
...
»

Summary of Contents for GECKO STAR 2.0




















Reviews:

No comments

Related manuals for GECKO STAR 2.0

Brand: Husqvarna Pages: 24

Brand: Husqvarna Pages: 28

Brand: Husqvarna Pages: 24

Brand: Husqvarna Pages: 24

Sunjoe SJEDGE7-RM

Brand: SNOWJOE Pages: 16

Brand: Efco Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands