Palm Handhelds m100 Handbook Download

Page: 81 / 232

Chapter 5

Page 73

3. In Date Book only: Select start and end times for your appointment

and tap OK.

4. Enter text for the record.

5. (Optional) To select attributes for the record:

– In Date Book, Address Book, To Do List, and Memo Pad, tap

Details.

– In Note Pad, tap the Menu icon

, and then tap Options and

Details.

6. In Address Book, Note Pad, and Memo Pad only: Tap Done.

There’s no need to save the record because your handheld saves it
automatically.

Editing records

After you create a record, you can change, delete, or enter new text at
any time. Two screen features tell you when your handheld is in
editing mode:

■

A blinking cursor

■

One or more dotted edit lines

Note:

In Note Pad you can write anywhere on the screen. So, you
will not see an edit line or blinking cursor.

Entering text

For information on how to enter text using Graffiti writing, the
onscreen keyboard, or the keyboard attached to your computer, see
Chapter 2. For information on entering text in Note Pad, see “Note
Pad” later in this chapter.

Edit line

Blinking cursor

Summary of Contents for Handhelds m100









































































































































































































































Search results

Summary of Contents for Handhelds m100

Reviews:

Related manuals for Handhelds m100

Brands by name

Popular brands

Palm Handhelds m100, Handbook

Search results

Summary of Contents for Handhelds m100

Reviews:

Related manuals for Handhelds m100

Brands by name

Popular brands