Palm i705 Handbook Download

Page: 171 / 238

Conducting a HotSync Operation Via Modem

161

To return to local USB cradle HotSync operations on a Windows computer:

If needed, connect the cradle to the USB port of your computer you use for
HotSync operations.

Click the HotSync Manager icon

in the Windows system tray, and select

Local USB if it is not already checked.

To return to local Serial cradle HotSync operations on a Windows computer:

If needed, connect the cradle to the port of your computer you use for HotSync
operations.

Click the HotSync Manager icon

in the Windows system tray.

Choose Setup, and then click Local.

Select the COM port where your cradle is connected.

Click OK.

To return to local serial cradle HotSync operations on a Macintosh:

If needed, connect the cradle to a serial port on your Macintosh.

Double-click the HotSync Manager icon in the Palm folder.

In the HotSync Controls tab, select Enabled.

Click the Serial Port Settings tab.

Under Check for handheld connection using, select Local Setup.

Under Local Setup, select the port where your cradle is connected from the Port
pop-up menu.

Close the HotSync Software Setup window.

Now, the next time you want to perform a HotSync operation, just press the
HotSync button on the cradle, as you always did in the past.

Conducting a HotSync Operation Via Modem

You can use a modem to synchronize your handheld when you are away from your
computer.

NOTE

The first HotSync operation must be local, using the cradle. After that, you can

perform a modem HotSync operation.

To perform a HotSync operation via modem you need the following:

■

A modem connected to your computer.

■

Palm Desktop software configured for use with the modem.

■

A modem connected to your handheld.

Summary of Contents for i705















































































































































































































































Search results

Summary of Contents for i705

Reviews:

Related manuals for i705

Brands by name

Popular brands

Palm i705, Handbook

Search results

Summary of Contents for i705

Reviews:

Related manuals for i705

Brands by name

Popular brands