background image

Setting Communication Preferences

409

4.

Enter the code to disable Call Waiting on the Disable call waiting line.

Each telephone company assigns a code to disable Call Waiting. Contact your 
local telephone company for the code that is appropriate for you.

5.

Tap OK.

6.

Tap Done.

Using a calling card

The Use calling card field enables you to use your calling card when dialing your 
ISP or Intranet server. Keep in mind that there is usually a delay before you enter 
your calling card number. When you define your calling card number, you need to 
add commas at the beginning to compensate for this delay. Each comma delays 
transmission of your calling card number for two seconds.

To use a calling card:

1.

From the Communications Preferences list, select Network.

2.

Tap the Phone box.

3.

Tap the Use calling card check box to select it.

4.

Enter your calling card number on the Use calling card line.

NOTE

The Phone Setup dialog box works correctly for AT&T and Sprint 

long-distance services. However, because MCI works differently, MCI 
customers need to enter the calling card number in the Phone # field and the 
phone number in the Use calling card field.

TIP

It’s a good idea to add at least three commas before your calling card 

number to compensate for the cue delay.

5.

Tap OK.

6.

Tap Done.

Enter your 
calling card 
number here

Select this 
box to use a 
calling card

Summary of Contents for P80860US - Tungsten T2 - OS 5.2.1 144 MHz























































































































































































































































































































































































































































































































Reviews: