background image

Setting Communication Preferences

253

2.

Tap On or Off.

3.

If you selected On in the previous step, select the Show penstrokes check box to 
display penstrokes while writing, or deselect this check box to hide penstrokes.

4.

Tap Done.

See

“To use the full-screen writing area:”

 in 

Chapter 3

 for details on using full-

screen writing to enter data.

Setting Communication Preferences

The Communication Preferences category enables you to access screens where you 
can modify Connection and Network settings. 

To open the Communication Preferences screens:

1.

Tap the Home icon 

.

2.

Tap the Prefs icon 

.

Connection Preferences

The Connection Preferences screen enables you to define the settings used to 
connect your handheld to other devices. The screen displays a list of available 
configurations that are ready to be further defined; the list varies depending on the 
kind of software you’ve added to your handheld. For existing connection types, 
you can either use the default connection information or edit this information.

You can also create custom configurations, such as the following:

Modem to Infrared:

 A connection between the IR port of your 

handheld and a modem. The modem can be attached to or 
within a mobile phone or other device containing an IR port. 
(Some infrared phones contain modems.)

Summary of Contents for P80880US - Tungsten E - OS 5.2.1 126 MHz































































































































































































































































































































Reviews: