background image

Tapping and typing

13

Clock

Tap the Clock icon   to display the current time and date. 
The display closes automatically after two seconds.

ABC

With the cursor in an input field, tap ABC to activate the 
alphabetic keyboard.

123

With the cursor in an input field, tap 123 to activate the 
numeric keyboard.

Check box

Tap a check box to select or deselect it. When a check box 
contains a checkmark, the corresponding option is selected 
and active. When a check box is empty, the corresponding 
option is deselected and inactive.

Command buttons

Tap a button to perform a command. Command buttons 
appear at the bottom of dialog boxes and application screens.

Previous/next arrows

Tap the left and right arrows to display the previous and next 
records; tap the up and down arrows to display the previous 
and next pages of information. 

Pick list

Tap the arrow to display a list of choices, and then tap an 
item in the list to select it.

Scroll bar

Drag the

 

slider, or tap the top or bottom arrow, to scroll the 

display one line at a time. To scroll to the previous page, tap 
the scroll bar just above the slider. To scroll to the next page, 
tap the scroll bar just below the slider.

You can also scroll to the previous and next pages within a 
record by pressing Up and Down on the navigator.

Scroll bar 

Previous/next arrows

Command button

Pick list

Entry box

Summary of Contents for P80880US - Tungsten E - OS 5.2.1 126 MHz































































































































































































































































































































Reviews: