12
S
P
T
1
5
5
0
Troubleshooting
SPT 1550 terminal does not turn on:
•
Make sure batteries are installed properly.
•
Replace the batteries. If your SPT 1550 terminal still does
not operate, try a soft reset; see
Resetting Your SPT 1550.
Low battery warning after replacing the batteries:
•
The battery warning message may appear immediately after
replacing the batteries. In addition, if you check the battery
gauge in the Applications Launcher
immediately after replac-
ing the batteries, the gauge may start at “empty” and slowly
rise to “full.” This is normal. It takes a few minutes for the bat-
tery gauge to accurately show the condition of the batteries.
No sound:
•
Check the System Sound option in the General Preferences
screen. If the option is set to off, there will be no sound. See
the
SPT 1550 Product Reference Guide for more informa-
tion.
SPT 1550 terminal turns itself off:
•
Your SPT 1550 terminal is designed to turn itself off after a
period of inactivity. This period can be set at 30 seconds, one
minute, two minutes or three minutes. Check the “Auto-off af-
ter” setting in the General Preferences screen, and change
the setting if you need a longer delay before the automatic
shutoff feature activates. See the
SPT 1550 Product Refer-
ence Guide for more information.
SPT 1550 terminal doesn’t recognize my handwriting:
•
For your SPT 1550 to recognize handwriting input with the
stylus, you need to use the Graffiti
®
character strokes. See
the
SPT 1550 Product Reference Guide for information
about how to write Graffiti character strokes.
Summary of Contents for SPT 1550
Page 1: ...S P T 1 5 5 0 ...