16
S
P
T
1
5
5
0
Performing a Hard Reset
A hard reset also tells your SPT 1550 terminal to start over again.
With a hard reset all records and entries stored in your SPT 1550
terminal are erased.
Therefore, never perform a hard reset unless
a soft reset does not solve your problem.
Note:
You can restore any data previously synchronized with
your computer during the next HotSync operation.
To perform a hard reset:
1. Hold down the green power button on the front panel of the
SPT 1550 terminal.
2. While holding down the power button, use the tip of an un-
folded paper clip (or similar object
without a sharp tip) to gen-
tly press the reset button.
3. Release the power button.
4. When a message appears on the SPT 1550 terminal screen
warning that you are about to erase all the data stored on
your SPT 1550 terminal, do one of the following:
a. Press the upper half of the scroll button on the front panel
of the SPT 1550 terminal to complete the hard reset and
display the Digitizer screen.
b. Press any other button to perform a soft reset.
Note:
With a hard reset, the current date and time are re-
tained. Formats Preferences and other settings are re-
stored to their factory default settings.
Summary of Contents for SPT 1550
Page 1: ...S P T 1 5 5 0 ...