96
4.
Select
Trusted Devices
.
5.
Select
Add Device
. (The
Discovery
icon appears, indicating that
the discovery process is active.)
6.
Select the
Show
pick list and select
Nearby devices
.
7.
If the device you want to add doesn’t appear in the discovery
results list, make sure that the other device is ready to receive
a connection request (see the device’s documentation), and
then select
Find More
on your Treo device.
8.
Enter the same passkey on your Treo device and on the Bluetooth device, and then
select
OK
.
9.
Select
Done
.
Important:
Some Bluetooth devices have a predefined passkey. If your device has a
predefined passkey, you can find the passkey in the documentation for
that device. Other Bluetooth devices provide a screen where you enter
a passkey that you make up. In either case, you must use the same
passkey on both your Treo device and your Bluetooth device. We
recommend that, where possible, you make up a passkey of 16
alphanumeric characters (letters and numerals only) to improve the
security of your Treo device. The longer the passkey, the more difficult
it is for the passkey to be deciphered.
Tip:
To accept a connection request from another Bluetooth device, enter
the correct settings as described in “Entering Basic Bluetooth Settings”
on page 94, and then enter the same passkey on your Treo device and
on the Bluetooth device. If you want to form a partnership with the
requesting device, check the
Add to trusted device list
box. Select
OK
.
Summary of Contents for Treo 755P
Page 6: ...vi...
Page 7: ...Introduction Introduction 1 Introduction In This Section About This Guide What You Need...
Page 52: ...46...
Page 130: ...PN 406 10970 00 v 1 0...
