4
Palmgren Operating Manual & Parts List
80420, 80421, 80422 and 80423
ASSEMBLY (CONTINUED)
MODELS 80422 AND 80423
Refer to Figure 5.
•
Remove tape securing keys from spindle motor body.
•
Insert spindle motor into bracket of control arm; make sure
keys on spindle motor are seated completely into the bracket.
•
Make sure that exhaust hose fittings of spindle motor and
control arm are on the same side.
•
Secure spindle motor tightly into bracket using both socket head
bolts.
•
Attach air hose fitting securely to spindle motor.
MOUNT LUBRICATION UNIT
Refer to Figure 6.
•
Remove front cover of lubricator body by lifting tab at top of
cover and pulling cover outward.
•
Insert the two mounting bolts as shown.
•
Attach mounting bracket to the back of lubrication body with
two nuts.
•
Replace front cover.
•
Secure lubrication unit to the support arm using socket head
bolts provided on support arm. Attach bracket using the center
hole and right slot of bracket.
•
Attach pressure gauge, quick connect and air hose fittings.
ATTACH AIR HOSE
Refer to Figure 10.
•
Attach air hose onto outlet fitting of lubrication unit and inlet
fitting of spindle.
•
Press hose firmly into fittings. Fittings are spring loaded. Hose
can be removed by depressing lip of fitting.
Figure 8
Figure 9
Figure 5
Figure 6
Figure 7
Operating Lever
Air Hose Fitting
Exhaust Hose Fittings
Insert Bolts Here
Quick
Conntect
Fitting
Air Hose
Fitting
Pressure
Gauge
Reverse Button
Socket Head Bolts
