background image

ION 2000 Overview

ION Device Compliance Statement

The following lists the ION device hardware compliance statements:

VCCI

: This secon provides the compliance statement for the Voluntary Control Council for

Interference by Informaon Technology Equipment (VCCI), which governs radio frequency

emissions in Japan. The following informaon is in accordance to VCCI Class B requirements:

Translaon

: This is a Class B product. In a domesc environment this product may cause radio

interference, in which case the user may be required to take correcve acons.

KCC

Translaon

: Korean Communicaons Commission (KCC) Class B Statement—This equipment

is an electromagnec compable device for business purposes (Class B). The provider or user

should be aware that the equipment is intended for use outside the home.

UL

: Product Ambient Temperature: 0~40 degree C

Risk of explosion if baery is replaced by an incorrect type. Dispose of used baery

according to local regulaons.

CE (European Union (EU) Electromagnec Compability Direcve)

The ION devices that do not contain radios (ION 1200) comply with the requirements set out

in the Electromagnec Compability Direcve (2014/30/EU) and the Low Voltage Direcve

2014/35/EU.
The ION devices with radios (ION 1200-C-ROW, ION 1200-C5G-WW) comply with the

requirements set out in the Radio Equipment Direcve (2014/53/EU).

Federal Communicaons Commission (FCC) statement for a Class B digital device or

peripheral

: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protecon against harmful interference in a residenal installaon. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instrucons, may cause harmful interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular installaon. If

this equipment does cause harmful interference to radio or television recepon, which can be

ION 2000 Hardware Reference

17

©

2021 Palo Alto Networks, Inc.

Summary of Contents for ION 2000



































Reviews: