Service the PA-3400 Series Firewall
STEP 4 |
Slide the replacement SSD module onto the rails and gently push it into the firewall.
STEP 5 |
Power on the firewall and connect a standard RJ-45 Ethernet cable from the RJ-45 port on
your computer to the MGT port on the firewall.
STEP 6 |
Change the IP address on your computer to an address in the 192.168.1.0/24 network, such
as 192.168.1.2.
STEP 7 |
From a web browser, go to hps://192.168.1.1 and, when prompted, log in to the web
interface using the default username and password (admin/admin).
STEP 8 |
Configure management access and
the firewall configuraon.
For informaon on how to upgrade or downgrade PAN-OS, see the New Features Guide for
the PAN-OS version that your firewall is running. The New Features Guides are located on the
PA-3400 Series Next-Gen Firewall Hardware Reference
40
©
2022 Palo Alto Networks, Inc.