PA-400 SERIES NEXT-GEN FIREWALL HARDWARE REFERENCE | PA-400 Series Firewall Overview
17
©
2021 Palo Alto Networks, Inc.
PA-400 Series Front Panel
The front panels of the PA-440, PA-450, and PA-460 firewalls are identical. The following image shows the
front panel of the PA-440 and the table describes each front panel component.
Item
Component
Description
1
Ethernet ports
Eight RJ-45 10/100/1000Mbps
ports for network traffic.
You can set the link speed and
duplex mode or choose auto-
negotiate.
2
MGT port
Use this Ethernet
10/100/1000Mbps port
to access the management
web interface and perform
administrative tasks. The
firewall also uses this port for
management services, such as
retrieving licenses and updating
threat and application signatures.
3
CONSOLE port
(Micro USB)
Use this port to connect a
management computer to the
firewall using a standard Type-A
USB-to-micro USB cable.
The console connection provides
access to firewall boot messages,
the Maintenance Recovery Tool
(MRT), and the command line
interface (CLI).
Refer to
for more information and to
download the Windows driver or
Summary of Contents for PA-400 Series
Page 1: ...PA 400 Series Next Gen Firewall Hardware Reference paloaltonetworks com documentation...
Page 4: ...iv TABLE OF CONTENTS...
Page 14: ...14 PA 400 SERIES NEXT GEN FIREWALL HARDWARE REFERENCE Before You Begin...
Page 40: ...40 PA 400 SERIES NEXT GEN FIREWALL HARDWARE REFERENCE Install the PA 400 Series Firewall...
