©
Palo
Alto
Networks,
Inc.
Panorama
6.1
Administrator’s
Guide
•
203
Administer
Panorama
Monitor
Panorama
Set
Up
Alerts
for
Panorama
Set
Up
Alerts
for
Panorama
Step
1
Create
a
server
profile
for
your
server.
1.
Select
Panorama > Server Profiles > Email
.
2.
Click
Add
and
then
enter
a
Name
for
the
profile.
3.
Click
Add
to
add
a
new
server
entry
and
enter
the
information
required
to
connect
to
the
Simple
Transport
Protocol
(SMTP)
server
and
send
(you
can
add
up
to
four
servers
to
the
profile):
•
Server
—Name
to
identify
the
server
(1
‐
31
characters).
This
field
is
just
a
label
and
does
not
have
to
be
the
host
name
of
an
existing
SMTP
server.
•
Display Name
—The
name
to
display
in
the
From
field
of
the
email.
•
From
—The
address
where
notification
emails
will
be
sent
from.
•
To
—The
address
to
which
notification
emails
will
be
sent.
•
Additional Recipient(s)
—To
send
notifications
to
a
second
account,
enter
the
additional
address
here.
•
Gateway
—The
IP
address
or
host
name
of
the
SMTP
gateway
to
use
to
send
the
emails.
4.
Click
OK
to
save
the
server
profile.
Step
2
(Optional)
Customize
the
format
of
the
logs
Panorama
sends.
Select
the
Custom Log Format
tab.
For
details
on
how
to
create
custom
formats
for
the
various
log
types,
refer
to
the
.
Step
3
Save
the
server
profile
and
commit
your
changes.
1.
Click
OK
to
save
the
profile.
2.
Click
Commit
,
and
select
Panorama
as
the
Commit Type
.
Step
4
Enable
notification
for
specific
events
in
the
system
and
config
logs.
1.
Enable
notification.
•
For
system
events:
a.
Select
Panorama > Log Settings > System
.
b.
Click
the
link
for
each
severity
level
for
which
to
enable
notification,
and
then
select
the
server
profile
you
created.
•
For
configuration
changes:
a.
Select
Panorama > Log Settings > Config
and
edit
the
Log
Settings
‐
Config
section.
b.
Select
the
server
profile
you
created.
2.
Click
Commit
and
select
Panorama
as
the
Commit Type
.
