background image

34

   ION 2000 HARDWARE REFERENCE   |   Install ION 2000

©

 2021 Palo Alto Networks, Inc.

• Controller Port: Connect the controller port to an ethernet port. The controller port is used for ION-

to-network controller communication and monitoring. By default, it is configured as a DHCP client.

• Internet or WAN or LAN Ports:

• Ports 1 to 3 are used as internet, WAN, or LAN ports. Ports 2 and 3 are DHCP-enabled by default.
• Ports 4 and 5 are used as WAN or LAN ports. They are pre-configured as bypass pairs with inline

fail-to-wire capability.

STEP 6 |

Select any port(s) from ports 1 to 3 to configure as internet ports and plug the internet ports

into a broadband internet source.

• By default, the ports configured for internet are protected by a firewall. They can exist behind a

traditional firewall or NAT device.

• Configure the controller port to an existing DHCP-enabled LAN with access to the internet via a

private network to enable configuration of static internet port values, if the internet ports require

static IP configuration.

STEP 7 |

Connect the cables to port 4 and 5 for private WAN connections as shown in 

step 5

, and verify

communication between the devices connected to the corresponding WAN or LAN ports.

Best Practice

It is best practice to execute this step during low traffic time or a network maintenance
window where a 1-5 second network interruption can be tolerated.

At this point, the ION 2000 displays as 

Connected

 and 

Online-restricted

 on the Prisma SD-WAN

console.

Summary of Contents for Prisma SD-WAN ION 2000







































Reviews: