2101
800-233-5484
PalosSports.com
#PalosSports
11. Push the plug with locking pin into the large base.
Remove the metal locking pin from the plug. Insert
the narrower, or bottom portion, of the tall or short
post into the plug. You may have to twist ot use firm
pressure to move the post into the plug. Line up the
larger hole at the bottom of the post with the locking
pin whole in the plug. Insert pin through both holes
and secure with nut.
12. Repeat step 11. for second base and post.
* Completed Base/Crossbar/Post Setup (At this
point you may fill the bases with water, sand or
pea gravel)
13. Unfold dual-sided target mat. Peel back the top
Velcro flap and wrap around the top crossbar. Peel
back the Velcro side flaps and wrap around each of
the two side posts. Apply any targets directly to
either side of the Velcro mat.
Single bolt locks
in place
Base Plug
Top Velcro Flap
Side Velcro Flap
