17
18
c
d
a
b
When inserting the door
panel use a flat surface and
if the panel does not fit
properly, trim the lower and
upper corners of the panel.
Fit panel P502 into place.
Make sure the panel fits into
the grooves in profiles A192
and A174.
Fit panel P518 into the
lower groove (a).
Fit profile A182 in place.
Make sure panel P518 fits
into the groove in profile
A182(b). Tighten all screws.
NOTE:
Make sure the
grooves on both sides of the
panel are properly
positioned along the
aluminum-extruded profiles.
When fitting the plastic strips
you must put pressure on
them until they snap into
place. Put the pressure at
one end of the platic strip
and continue all the way to
the other end.
A182 / 1
P311 / 2
P313 / 2
P502 / 1
P518 / 1
b
a
4008
P502
P502
P518
4008
A182
A182
P311
P313
P313
c
d
a
b
A192
A174
