11
You can brush it or rinse it will water.
rinsing with water (fig. 2)
1. Remove the external blade support and rinse with water for 1 or 2 minutes, as shown
in the illustration.
2. Dry the external blade support and the appliance.
3. Reinsert the external blade support in the appliance.
brushing (fig. 3)
- Remove the external blade support and internal blade and brush the appliance body,
external blade support and internal blade respectively.
- Do not brush the internal blade as shown in the illustration.
Wash the internal part and hair compartment with water. Dry the appliance with a cloth
and leave it to dry completely.
MaiNTENaNCE (fig. 4)
Grease the external blade and clipper once a week after washing them.
1. Apply 1 or 2 drops of lubricant to the central part of the three external blades and the
serrated area of the clipper.
2. Take the clipper and turn it on for 1 or 2 minutes, and then turn it off.
3. Remove all traces of oil from the external blade surface and the serrated part of the
clipper with a cloth.
ENVirONMENTaL PrOTECTiON
Unwanted electrical products must not be disposed of with household waste. Take this
appliance to your local recycling centre for safe disposal.
Thank you for confiding in us by choosing one of our products.