2
ANTENNA INPUT
SHARPNESS
LANG
PIC SOUND
STAND BY
-
VOL
PR
OPERATION INSTRUCTION
POWER SWITCH AND STANDBY BUTTON
Press POWER SWITCH, the TV set will be in STANDBY mode, and the indicator is
red.
In STANDBY mode, press any one of the following buttons could turn on the TV:
a. STANDBY ( ) on local or remote keyboard; b. DIGITAL 0~9.
Then the indicator is orange and the channel number is displayed in the upper right corner
of the screen for 10 seconds.
Sound mute of 1-2 seconds is executed after power on, and TV will tune to the last selected
program and the last memorised setting for contrast, brightness, saturation, volume,
etc.
If there has been no TV signal at the current program position for five minutes, the TV set
will go into STANDBY mode automatically; and the indicator is red.
In operation mode, press the STANDBY ( ) on local & remote keyboard, the TV will go
into STANDBY mode; the indicator is red.
If you do not want to watch TV, press POWER SWITCH again to turn off the TV set's
power completely.
INST
+
-
+
AV IN/OUT
POWER SWITCH
PRESET DOOR
REMOTE SENSOR
POWER INDICATOR
