Searching Channels (continued)
11
Programme skip
P+
P-
V-
V+
MENU
P+
P-
V-
V+
MENU
TUN
SKIP
PROG NO
ORGANISE
SEARCH
FINE TUNE
ON
Program skip
Channels can be set so that they are skipped during
program selection.
1 Press the P+/- buttons or
PROGRAM NUMBER (0-9)
button to choose the desired
channel (e.g. channel 1).
1
AUTO
BG
2 Press the
MENU
button. The
MAIN MENU
will appear
with the
PlC
(picture) icon flashing. Press the
MENU
button a further 3 times until the
TUN
(tuning) icon is
flashing. Press
P-
to enter the
TUNING
menu.
3 Press the P+/- buttons to
select "SKIP".
4 Press the V-/+ buttons to
turn the SKIP function "ON".
5 Press the EXIT button to close
the menu. When you use the P+/-
buttons to select channel, this
channel will be skipped. However,
you can still use the PROGRAM
NUMBER buttons to select the
skipped channel numbers.
If you want to recover the skipped channel
1 Use the PROGRAM NUMBER buttons to select the
channel number to be recovered.
2 Repeat steps 1-3 above.
3 Press the V-/+ buttons to turn the SKIP function "OFF".
P+
P-
V-
V+
MENU
