Press AV button on the remote control unit to set TV mode, and choose the
desired channel. At this time, the program recorded is displayed on the screen.
Note: the following mis-operation should be avoided during recording.
* Press STANDBY button or set to VIDEO mode.
* Change the current channel accidentally.
Press the AV button on the remote controller or TV/AV button on the set to select "AV" mode,
"AV" and corresponding colour system will be displayed on the screen. The picture shown
on the screen is the program from the video equipment
External equipment connection
This set is incorporated with Audio & Video input and output terminals which allow direct
connection to external equipment (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for
playback and recording the programs.
1. Video playback
The figure below shows how to connect the TV set to the video equipment.
2. Recording TV program
The figure below shows how to connect the TV set to the VCR.
16
