background image

TROUBLE SHOOTING

Symptoms

Check these things

Try these adjustment

No picture,

no sound.

Be sure power cord is plugged in.

May be station trouble.

Check antenna connections.

Maybe in AV mode.

Press POWER BUTTON

Try another channel.

Press AV button once.

Poor sound,

picture OK.

May be station trouble.

May be local interference from

another appliance.

Check antenna connections. 

Try another channel.

Reorient antenna.

Adjust VOLUME control.

Poor picture,

sound OK.

Snowy picture

Lines in picture

Distorted picture

Weak picture.

Multiple images

(Ghost)

May be station trouble.

Check antenna connections.

Check antenna for broken wires.

May be local interference from

another appliance.

Try another channel.

Reorient antenna.

Adjust BRIGHTNESS

control.

Adjust CONTRAST control.

May be station trouble.

Check antenna connections.

May be local interference.

Try another channel.

Reorient antenna.

Poor colour or

no colour

Remote control

does not work.

May be station trouble.

Check antenna connections.

Check antenna for broken wires.

May be local interference from

another appliance.

Try another channel.

Reorient antenna.

Adjust COLOUR control.

Be sure power cord is plugged in

Check battery in Remote Control

Hand Unit.

Change batteries.

18

.

.

.

.

.

.

.

.

.
.

.

.

.

.

.

.

.
.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.
.

.

.

.

.

.

.

No picture,

Sound OK.

.

Station may be in trouble.

.

Try another channel.

Switch off for several

minutes, then switch on.

.

.

If any problem arises in the operation of your set, first check through this list of symptoms and 

correction. Should the problem be unsettled, unplug the set and contact your dealer.

Summary of Contents for 5169M





















Reviews: