Press the button to search channels from current channel to
lower channel (the screen displays glittering (" "). When a
channel is located, the searching stops, this channel is then
memorised with the preset position number.
OPERATION
Tuning in
(continued)
Use the MANUAL SEARCH function if desired channels can not be preset with the
AUTO SEARCH or if you would like to preset channels to specific position numbers one by one.
It is convenient to set the channel numbers to the same position numbers using MANUAL
SEARCH and SKIP functions.
Manual search
If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one
by one with the preferred channel numbers, please make use of Manual search.
you can also make use of
BAND
selection to quicken the
searching process in your desired band. Press the or
button moves the band to the next step in the sequence below.
VHFL
VHFH
UHF
3. When you want to store another channel at another position, repeat steps 1 & 2 above.
To preset channels (Manual search)
9
2.
1.
press the or button to select a channel number
within 0.7 seconds. Press and hold the or button
for over 0.7 seconds to select a decimal number
Note:
Note:
008
VHFL
OFF
POSITION
BAND
SKIP
SEARCH
MFT
AUTO MEMORY
lllllllllllll
lllllllllllllllllllllllllllllllll
008
VHFL
OFF
POSITION
BAND
SKIP
SEARCH
MFT
AUTO MEMORY
lllllllllllll
lllllllllllllllllllllllllllllllll
008
VHFL
OFF
POSITION
BAND
SKIP
SEARCH
MFT
AUTO MEMORY
lllllllllllll
lllllllllllllllllllllllllllllllll
Press the
MENU
button repeatedly to enter into the
(PRESET) menu, or press the or
button to select
POSITION
. Press the
or button to select a desired position
number (from 0~255)
Press the or button to select
SEARCH
.
Press the button to search channels from
current channel to higher channel (the screen
displays glittering (" ").
