Palsonic 7118, Owner'S Manual

When you want to store and memorise another
channel with another position, repeat steps 3.3, 3,4.

4. Skip unwanted program numbers

    After presetting the channels, you can skip unwanted
    program numbers to select your desired channels.

Repeat steps 3.1 to 3.3 to select the unwanted program
position of the unwanted channels .

Press the     or      button to select SKIP. Press the
      of       button to select SKIP ON.
After completion of the channel presetting, when you
press the CH          button to select channel, the
unwanted channels will be skipped. 

If you want to skip other unwanted channels, repeat
step 4.1 above to change the channel numbers.

If you want to restore the skipped program numbers,
do step 4. 1 to select these program numbers, then
press the       or       button to select SKIP OFF.

5. Manual Fine Tuning

When sound and picture's effect of a channel is poor
(for example : one or two CATV channel's sound and
picture are not standard) , you can correct by the use of
Manual Fine Tuning.

Repeat steps 3. 1 to 3.3 to select the channels you
want to manually fine tune.

Push the     or     button to select MFT, then press
      or       button, the channel begins to search until
the optimum picture and sound is achieved.

If some channel's colour or sound is abnormal, it
may be that the setting of the colour or the sound
system is wrong, please do the following step 6 to
set the colour and sound system.
After finishing the preset operation, press the
MENU button repeatedly until the "on - screen"
display disappears and exits from the main menu.

MANUAL SEARCH

MANUAL SEARCH

9

Press the     button to

select SKIP

Press the      or     button

select SKIP

SKIP  OFF

SKIP  ON

POSITION  10

POSITION  14

Press the     button to

select MFT

MFT 

Press the      button it
begins fine tuning in
direction.

Press the MENU button
repeatedly until on-screen
display menu disappears

3.5

4.1

llllllllllllll

- - - - -

4.2

5.1

5.2

Note:

MFT