3. SLEEP timer
Using the
SLEEP
button allows you to have the appliance automatically turned off after a preset
time (the time range will be as long as 120 minutes), and set the appliance to standby mode. At
every press of the button the setting time will be decreased by 30 minutes.
When the remaining time is 5 minutes left, it will be displayed once every 2 minutes for 4
seconds.
When the SLEEP timer is functioning, if you press
SLEEP
button again, the TV will display the
remaining time. If the power is switched off, the SLEEP timer will be cancelled. You must set it
again if wanted.
4. TV/AV selection
Press the
AV/TV
button on the set or
AV
button on the remote controller to select
TV
or
AV
mode.
When the TV is working at RF receiving mode, press
AV
button the set will be switched to AV1,
14
SLEEP OFF
SLEEP 120
SLEEP 30
Press SLEEP
Press SLEEP
Press SLEEP
Press the button and the upper right corner will display the current channel number and TV
system. After 4 seconds the display on the screen will disappear.
Other functions
1. Retain on-screen display
In VIDEO mode, it will only display VIDEO l (or VIDEO 2) and the colour system.
2. STD button
Press the STD button and each time the colour system displayed on the screen will change in the
sequence of
AUTO
PAL
N358
N443
In this TV model the colour system is automatically identified. In normal circumstances, please
set colour system to AUTO.
2
AUTO
SYS 1
Press
After 4
seconds
+
+
