AT ANYTIME DURING PLAYBACK:
- AFTER EACH TRACK NUMBER, REMEMBER TO PRESS THE "PROG./ MEM" KEY.
- AFTER A MAXIMUM OF SONGS (OR LESS) HAVE BEEN SELECTED AS DESCRIBED
ABOVE.
- ALSO, THE "MEMORY" SYMBOL WILL REMAIN "ON" TO INDICATE THAT YOU HAVE
SAVED A PROGRAM-MEMORY (SEQUENCE).
- PRESSING PLAY
WILL NOW PLAY BACK THE "SAVED SEQUENCE" IN
THE PROGRAM MEMORY.
- TO CLEAR (CANCEL) THE ENTIRE PROGRAM WHICH IS STORED IN THE MEMORY,
SIMPLY PRESS "STOP"
, OR SWITCH "OFF" THE SET.
PROGRAM FUNCTION
- THE CD PLAYER CAN BE PROGRAMMED TO PLAY ANY SEQUENCE OF UP TO
20 TRACKS FOR AUDIO-CD / 20 TRACKS FOR MP3, AS DESIRED.
- ALWAYS PRESS THE STOP
KEY BEFORE STARTING THE PROGRAMMING.
- PRESS THE "PROG./ MEM KEY ,THE DISPLAY WILL SHOW "P-01" TO INDICATE
THAT THE SET IS NOW IN "MEMORY PROGRAMMING MODE", AT THE FIRST
MEMORY POSITION.
- REPEAT THE PREVIOUS 2 STEPS, EACH TIME SELECTING ANY TRACK NUMBER
OF YOUR CHOICE TO BE STORED IN THE SUCCESSIVE MEMORY (PROGRAM)
POSITIONS.
- WHEN YOU PRESS
THE DISPLAY WILL ADVANCE TO
THE NEXT MEMORY POSITION (eg. "P02").
THE "
PROG./ MEM" KEY
- PRESS THE BACK OR NEXT KEYS
OR
TO SELECT THE TRACK (SONG)
NUMBER YOU WISH TO BE STORED IN THE FIRST MEMORY (PROGRAM)
POSITION, AND PRESS THE "PROG./ MEM" KEY TO CONFIRM YOUR SELECTION.
E-7
E-8
HOW TO PLAY MP3 DISCS
- INSERT A MP3 CD DISC, CLOSE THE DOOR.
- PRESS THE "FUNCTION" KEY TO SELECT "CD".
- THE DISC WILL SPIN AND THE FIRST TRACK (SONG) WILL START PLAYING
AUTOMATICALLY, THE DISPLAY WILL INDICATE THE CURRENT TRACK NO.: (001).
- AT ANYTIME DURING PLAYBACK, PRESS AND RELEASE
OR
TO SKIP
BACKWARDS OR FORWARDS BY ONE TRACK.
- AT ANYTIME DURING PLAYBACK, PRESS THE "STOP" KEY
TO STOP
OPERATION OF THE SET AND THE DISPLAY SHOW THE TOTAL NUMBER OF
TRACKS (SONG) OF THE DISC.
3D-VIRTUA L SURROUND
USB-DRIVE & SD-CARD MP3 PLAYBACK
- THIS UNIT IS EQUIPPED WITH A USB SOCKET WHICH CAN ACCEPT AND PLAY MP3
FILES STORED ON STANDARD USB FLASH DRIVES (ALSO KNOWN AS "PEN DRIVES")
WHICH ARE FOR MEMORY STORAGE. (COMPATIBLE WITH USB VERSION 1.1 & 2.0).
- THIS UNIT ALSO HAS A BUILT-IN SD-CARD SOCKET WHICH CAN ACCEPT AND PLAY
MP3 FILES STORED ON STANDARD "SD" TYPE FLASH MEMORY CARDS
(OF MAXIMUM CAPACITY = 16 GB) WHICH ARE COMMONLY AVAILABLE.
- TO UTILIZE THIS FACILITY, FIRST INSERT EITHER A USB-DRIVE OR AN SD-CARD INTO
THE CORRECT SLOT (PORT).
- PRESS THE FUNCTION KEY REPEATEDLY UNTIL THE DISPLAY SHOWS "SD" OR
"USB".
- THE FIRST MP3 SONG WILL START PLAYING AUTOMATICALLY. THE DISPLAY WILL
INDICATE THE CURRENT FILE NO.: (001).
- AT ANYTIME DURING PLAYBACK, PRESS AND RELEASE
OR
TO SKIP
BACKWARDS OR FORWARDS BY ONE FILE.
- AT ANYTIME DURING PLAYBACK, PRESS THE "STOP" KEY
TO STOP OPERATION
OF THE SET AND THE DISPLAY SHOW THE TOTAL NUMBER OF MP3 SONGS OF
THE DEVICE.
- ALL FUNCTIONS FOR USB-DRIVE & SD-CARD MP3 PLAYBACK ARE EXACTLY THE SAME
AS IN CD-MP3 MODE (AS PREVIOUSLY DESCRIBED).
NOTE: THIS UNIT SUPPORTS UP TO MAXIMUM MEMORYSIZE OF16GB USB FLASH DRIVE &
SD CARD.
NOTE:
A SMALL PERCENTAGE (ABOUT 5%) OF USB FLASH DRIVES MIGHT NOT BE READABLE,
DUE TO THOSE USB-DRIVE MANUFACTURERS NON-COMPLIANCE WITH THE FULL (OFFICIAL)
USB 1.1 / 2.0 STANDARDS.
ALTHOUGH THIS PRODUCT IS FULLY COMPATIBLE WITH USB 1.1 & 2.0 STANDARDS,
THE READING TIME FOR A USB-DRIVE OR SD-CARD VARIES DEPENDING ON THE SPEED OF
THE MEMORY DEVICE AND THE NUMBER OF SONGS AND FOLDERS. IN SOME CASES
THE READING TIME MAY BE AS LONG AS 60 SECONDS.
ALWAYS SWITCH OFF THE UNIT OR CHANGE MODE TO “ CD” OR “ RADIO” BEFORE REMOVING
A USB FLASH DRIVE OR SD-CARD, TO PREVENT DAMAGE TO YOUR USB DEVICE OR
MEMORY CARD.
IMPORTANT
IMPORTANT POINT
Please do NOT use a USB Extension Cable to connect your USB FLASH DRIVE to the
USB PORT of this unit.
Such cables can pick up additional interference which can corrupt the data flow,
preventing normal operation and usage of the USB port. Always connect your
USB Flash Drive DIRECTLY to the USB PORT without any USB extension cables.
THIS UNIT DOES NOT SUPPORT USB-MP3 PLAYER, DUE TO THEIR INHERENT LACK OF
SOFTWARE COMPATIBILITY. ONLY USB " PEN DRIVES" (FLASH MEMORY USB DRIVES)
CAN BE USED, FOR MP3 PLAYBACK.
-VI RTU AL
PLAY MODE FUNCTION
-
- PRESS REP./RAND. KEY REPEATEDLY TO SELECT THE FOLLOWING OPTIONS:
1. REPEAT: TO REPEAT THE CURRENT TRACK (DISPLAY SHOWS "REPEAT")
2. REPEAT FOLDER: TO REPEAT THE CURRENT FOLDER (DISPLAY SHOWS
"REPEAT FOLDER")
(ONLY AVAILABLE IN MP3 PLAYBACK WITH FOLDER)
3. REPEAT ALL: TO REPEAT ALL TRACK (DISPLAY SHOWS "REPEAT ALL")
4. RANDOM:
TO SHUFFLE ALL SONGS IN RANDOM ORDER
(DISPLAY SHOWS "RAND")
USING THE AUDIO LINE IN CONNECTION (AUX-INPUT)
- YOU CAN CONNECT THE AUDIO OUTPUT OF AN EXTERNAL DEVICE SUCH AS
A MP3 PLAYER OR A TV TO THIS UNIT, TO LISTEN TO THE SOUND OF THAT DEVICE
THROUGH THE HIGH QUALITY AMPLIFIER OF THIS MUSIC SYSTEM.
- TO CONNECT THE EXTERNAL DEVICE PLEASE USE A STANDARD STEREO
HEADPHONE (3.5MM TO 3.5MM PLUGS) CABLE TO CONNECT THE
"HEADPHONE-OUT OR AUDIO LINE-OUT" OF THE DEVICE TO THE AUX-INPUT SOCKET
OF THIS UNIT.
- PRESS THE FUNCTION KEY TO "AUX".
- SWITCH ON THE UNIT AND THE EXTERNAL DEVICE (eg. MP3-PLAYER OR TV).
- START PLAYBACK OF THE EXTERNAL DEVICE AND ADJUST THE VOLUME CONTROL
OF THE MAIN UNIT TO THE DESIRED LEVEL.
- REMEMBER TO SWITCH OFF THE UNIT WHEN YOU ARE FINISHED USING
THE EXTERNAL DEVICE.
