DVD Player
White Red Yellow
Connections
8
Basic TV Connections
Connect a Component Video cable (not included)
from the Component jacks (Y, Pb/Cb, Pr/Cr) on
the rear of the player to the Progressive Scan or
Component Video inputs on your television.
Set the Video Output to Progressive Scan (P-
SCAN) or Component Video (S + Component) in
the player's Screen Setup menu.
You can also press the
PROG.SCAN
button as
a short cut to switch between Progressive Scan
and Interlace Scan modes.
Set your TV to its Progressive Scan or Component
Video input to view the player.
Progressive Scan/Component Video
Connections
For improved picture quality, you can connect
the DVD player to a TV equipped with S-Video,
Component Video, or Progressive Scan inputs. These
connections require special S-Video or Component
Video cables (not included). For audio, choose one of
the Enhanced Audio Connections shown on page 9.
S-Video Connections
Enhanced Video Connections
You can connect the DVD player to a standard
television using the player's Audio and Video jacks.
Connect the supplied audio cable (red and white)
from the Audio jacks on the rear of the player to
the Audio Inputs on your television.
Connect the supplied video cable (yellow) from
the Video jack on the rear of the player to the
Video Input on your television.
Set your TV to its appropriate Video input to view
the player.
Connect an S-Video cable (not included) from
the S-Video jack on the rear of the player to the
S-Video input on your television.
Set the Video Output to S-Video in the player's
Screen Setup Menu
Set your TV to its S-Video input to view the player.
Component Video OR S-Video
DVD Player
