Dear customers:
Thank you for your purchasing of this DVD Player produced .
We strongly suggest you carefully read the Operating Instructions and take special note to the precautions
listed below before enjoying it.
l
Features
DVD: a completely new dimension in video entertainment.
Subtitles may be displayed in one of a maximum of 32 languages *.
The audio soundtrack can be heard in up to 8 languages *.
The multi-angle function allows you to choose the viewing angle of scenes that were shot from a number
of different angles. (Limited to DVD discs recorded with multiple camera angles.)
*The number of the languages recorded is dependent on the disc.
n
High quality digital audio
The DVD player include 5.1 channels (Dolby AC-3) stream output port which makes it possible to enjoy
Dolby Digital Surround sound by adding an optional AC-3 decoder.
With the linear PCM sound of 48kHz/16bit-96kHz/24bit, audio quality exceeding that of audio CDs
becomes possible.
l
Model DVD3000 player feature AC-3 5.lch audio output.
n
Many convenient features
Direct access to favorite scenes (title/chapter/time)
The player equipped with microphone jacks and echo level controls for enjoying KARAOKE.
Chinese or English menu select optionally.
Parental lock settings to prevent play of discs unsuitable for some audiences [Limited to some DVD discs]
n
Compatible with PAL DVD discs and NTSC DVD discs
l
This DVD player can play discs in either PAL or NTSC system for it has system transfer function.
n
This player can play SVCD, CVD, VCD and audio CD discs as well as DVD discs.
l
Accessories
A remote control unit
An audio/video connect cord
An user manual
A scart cord
l
Basic operation
1. Preparation
A. Before playing DVD orVCD discs, please turn on the TV and select the correct video input.
B. If you want to enjoy the sound through audio speaker system, please turn on the audio system and select
the correct audio input.
C. If there is no audio system to playback Dolby AC-3 digital sound, please press the key SETUP in the
remote control unit to set the “audio output” to analogue status (through the
in remote control
unit). After setting up, press keys SETUP to exit.
(Analogue audio output is the default setting in the factory).
2. Simple playback
A. Press the button POWER in the front panel and the power supply indicator will illuminate, the
TV will
display the initiate image.
B. Press the button OPEN/CLOSE in front panel (or the key
in remote control unit) to open the disc tray .
C. Place a disc onto the tray, position it with the printed title side facing up.
D. Press the button PLAY in front panel [or the key, (confirm/play) in remote control unit3
6
l
l
l
l
l
l
l
l
l
