Using the unit
Operating the Radio continued
Press
Function / Result
The ‘Back’
20
or the ‘Next’
22
button on the remote
control. Or the ‘Back’
5
or the ‘Next’
6
button on
the unit.
RELEASE IMMEDIATELY.
To ‘Scan’ (manually adjust) the radio’s frequency ‘Up’ or ‘Down’ by 1-step at a time.
The radio’s LCD will indicate the exact frequency position. When a desired frequency
or station is reached. It can be saved into one of the ‘Memory’ positions (see ‘Radio
Memory’ below).
The ‘Back’
20
or the ‘Next’
22
button on the remote
control. Or the ‘Back’
5
or the ‘Next’
6
button on
the unit.
HOLD FOR 2 SECONDS.
To ‘Seek’ (automatically adjust) the radio’s frequency ‘Up’ or ‘Down’ to the next
available radio station. The radio’s LCD
will indicate the exact frequency of the station it
has found. When a desired frequency or station is reached. It can be saved into one of
the ‘Memory’ positions (see ‘Radio Memory’ below).
Radio Memory
At any time, the currently displayed radio station or frequency can be stored into one of the memory positions. There
are 30 memory positions for FM band. Switch your radio on and tune it to the desired radio station then follow the
instructions below.
Press
Function / Result
The
‘PROG/MEM/P-MODE’
button
7
on the remote
control or
??
o
n the unit.
This activates the ‘Radio Memory’ programming mode. Press MEM +
10
or MEM –
9
button on the remote control or MEM +
??
or MEM -
??
on the unit to select desired
Memory Position.
The
‘PROG/MEM/P-MODE’
button
17
o
n the unit.
To save the radio station to the selected ‘Memory Position’.
To recall any saved radio station, simply press MEM +
8
or MEM –
12
button on the
unit to scroll through saved radio stations.
To clear the memory of any radio stations simply save a new radio station to the same
Memory Position.
