background image

15. TELETEXT (      )

This button activates Teletext and puts the Teletext display on the screen.

16. CANCEL (X)

This button is used to return to TV while Teletext is searching for a page. The search
continues in the background, and when the page is found it puts the page number on the
upper left of the TV picture. To view the page, press button (15) to see Teletext, or
button (17) to mix.

17. MIX (

In Teletext mode, use this button to mix Teletext and TV pictures one on top of
the other.

18. INDEX (      )

Press this button to recall the stored list of page numbers if the TV station is sending it.
Otherwise, it switches to the Red colour memory button.

20. "0 ~ 9" DIGITAL KEYBOARD

Use these buttons to select a Teletext page number. To key in page 801, press "8" then
"0" then "1". Press the buttons deliberately. It takes a moment for the number to
register. The secret is to be slow. 

21. SIZE (      

)

Press the button to expand the top half of the display.
Press again to expand the bottom half of the display.
Press once more to return to normal size.

22. HALT (sub-pages) (      

)

When a Teletext page has sub-pages, the screen will change automatically to display the
next sub-page when it comes around. The HALT button freezes the page on screen to
prevent this. To release the page, press the HALT button again.
Sub-pages may be identified by a number such as 2/3 on the page itself. This 2/3 means
that the page on screen is sub-page 2 of a 3 page set.

23. REVEAL (?)

This button reveals hidden words such as quiz pages with hidden answers. The revealed
words disappear automatically in a few seconds. The REVEAL button only works if the
TV station supports quiz pages.

14

S183

S100

S170

press "1" "0" "0"

press "1" "7" "0"

press "1" "8" "3"

T
V

T

V

T
V

S102

press "+"

press "-"

press "+"

press "-"

S101

S100

Summary of Contents for MODEL 6738
























Reviews: