Low (Left Speaker)
CLEAR
The CLEAR button allows you to SKIP unwanted numbers so that you can tune 2, 7, 9,
10 without intermediate steps.
The procedure is the same as STORE- just substitute CLEAR for STORE in the
procedure:
Press CLEAR, choose the number, press CLEAR again. The number attached to "CLEAR
-" on the screen is then removed from the program. Another number may be cleared in
the same way.
To get the number back, use the STORE procedure.
THE CONTROL OF PICTURE AND SOUND
Function select
On the Front Panel, the "PICTURE" button is used to select the following functions:
BRIGHTNESS, COLOUR, CONTRAST, BALANCE and VOLUME in that order. Each
of the functions is adjusted by means of the adjacent -/+ level control buttons. The
-/+ control buttons only work while the function is displayed.
On the Remote Control Unit, each function has a separate set of buttons.
Adjustments
FUNCTION
ON SCREEN
DISPLAY
Decrease
Green Bar Moves
Increase
CONTRAST
VOLUME
Weak
Strong
Pale
Deep
Dark
Light
Low
Loud
ON SCREEN
DISPLAY
- - - - - - - - - -
- - - - - - - - - - - -
FUNCTION
DISPLAY
BALANCE
Low (Right Speaker)
3. Tint control: Turn the TINT knob on the TV set to obtain correct hue reproduction.
4. Treble control: Turn the knob on the TV set to adjust proper treble effect.
5. Bass control: Turn the knob on the TV set to adjust proper bass effect.
6
press PIC(VOLUME) UP button
press PIC(VOLUME) DOWN button
press PIC(VOLUME) UP button
press PIC(VOLUME) DOWN button
SATURATION
BRIGHTNESS
DISPLAY
.
2.
1.
- - - - - - - - - - - - - - - -
Green/Cyan Bar Moves
